Skip to main content (Press Enter)
Helcim Logo
Click here if you return to contents

Automatic Batch Settlement

Canadian Terminals

To set an automatic batch settlement, follow the instructions below. To remove the automatic settlement, the time should be set to "0000".

  • Press #
  • Press 3 Setup
  • Press 4 TransOptions
  • Press 4 for Settlement
  • Press 6 for Auto Time
  • Enter the time (24-hour clock format) and press OK
  • Press the red X until you are back at the main screen

US Terminals

To set an automatic batch settlement, follow the instructions below. To remove the automatic settlement, the time should be set to "0000".

  • Press #, enter password
  • Press 3 Setup
  • Press 5 Transoptions
  • Press 4 for Settlement
  • Press 6 for Auto Time
  • Enter the time (24-hour clock format) and press OK
  • Press the red X until you are back at the main screen

Related Articles

Settling Your Batch
Viewing Prior Batch Totals
Changing Settlement Report

Was this article helpful?

Feedback submitted - Thank you!