Skip to main content (Press Enter)
Helcim Logo
Click here if you return to contents

VX 680 3G Setup

Ethernet

  1. Insert the ethernet cable into the ethernet port (labeled ETH) on the rear of the charging base and plug the other end of the cable into your router. Please note this connection is only necessary for updating the terminal and not its use.
  2. Plug the power adapter into a wall outlet and then into the terminal (labeled with a lightning bolt)
  3. Place the terminal into the charging base (8-12 hours of charging is recommended daily)

Telephone

  1. Insert the ethernet cable into the telephone port (labeled with a telephone icon) on the rear of the charging base and plug the other end of the cable into your telephone outlet. Please note this connection is only necessary for updating the terminal and not its use.
  2. Plug the power adapter into a wall outlet and then into the terminal (labeled with a lightning bolt)
  3. Place the terminal into the charging base (8-12 hours of charging is recommended daily)

Related Articles

VX 520 Setup
VX 680 Bluetooth Setup
Software Download Instructions
Transaction Manually Keyed
Transaction Auth Only
Transaction Capture Auth Only
Transaction Sale
Transaction Void
Transaction Refunds
Loading Receipt Paper
Reprint Receipt
VX 520 Settlement & Reports
VX 680 Settlement & Reports
Tip Adjustments
Tip Prompts
Key Load

Was this article helpful?

Feedback submitted - Thank you!